Jump to content

IPv6 Routing Protocol for Low-Power and Lossy Networks

From Wikipedia, the free encyclopedia

RPL[1] (Routing Protocol for Low-Power and Lossy Networks) is a routing protocol for wireless networks with low power consumption and generally susceptible to packet loss. It is a proactive protocol based on distance vectors and operates on IEEE 802.15.4,[2] optimized for multi-hop and many-to-one communication, but also supports one-to-one messages.[citation needed]

This protocol is specified in RFC 6550 with special applications in RFCs 5867, 5826, 5673 and 5548. RPL can support a wide variety of link layers, including those with limitations, with potential losses or that are used in devices with limited resources. This protocol can quickly create network routes, share routing knowledge and adapt the topology in an efficient way.[citation needed]

Protocol configuration

[edit]

RPL[1] creates a topology similar to a tree (DAG or directed acyclic graph). Each node within the network has an assigned rank (Rank), which increases as the teams move away from the root node (DODAG[1]). The nodes resend packets using the lowest range as the route selection criteria.[citation needed]

Three control messages are defined in ICMPv6 via RFC 4443:

  • DIS (information request DODAG[1]): Used to request information from nearby DODAG, analogous to router request messages used to discover existing networks.[citation needed]
  • DIO (object of information of the DAG): Message that shares information from the DAG, sent in response to DIS messages, as well as used periodically to refresh the information of the nodes on the topology of the network.[citation needed]
  • DAO (object of update to the destination): Sent in the direction of the DODAG, it is a message sent by the teams to update the information of their "parent" nodes throughout the DAG.[citation needed]

Implementation

[edit]

The implementation of the RPL protocol occurs in wireless sensors and networks, the most used operating system for its implementation is Contiki which is a small open source operating system developed for use in a number of small systems ranging from 8-bit computers to integrated systems on microcontrollers, including sensor network nodes.[3]

Other operating systems

[edit]

The RPL protocol is implemented in other operating systems, such as:

  • LiteOS is an edition of the Zorin OS operating system designed for low-resource computers, developed in principle for calculators, but which has also been used for sensor networks.[3]
  • TinyOs was the first operating system oriented to the wireless sensor network (WSN), works through events and guided tasks, and uses an extension of the C language, called nesC. TinyOS is implemented as a set of cooperating tasks and processes and it determines the priorities between tasks and events.[3]
  • T-Kernel is an operating system that accepts applications as executable images in basic instructions. Therefore, it will not matter if it is written in C++ or Assembly language.[3]
  • EyeOS is defined as a desktop environment based on Web, which allows monitoring and access to a remote system through a simple search engine.[citation needed]
  • RIOT is a small operating system for networked, memory-constrained systems with a focus on low-power wireless Internet of Things (IoT) devices.[citation needed]

References

[edit]
  1. ^ a b c d Winter, Tim. "RPL: IPv6 Routing Protocol for Low-Power and Lossy Networks". tools.ietf.org. Retrieved 2018-10-13.
  2. ^ Pat, Kinney; Tero, Kivinen. "IEEE 802.15.4 Information Element for the IETF". tools.ietf.org. Retrieved 2018-10-13.
  3. ^ a b c d Calderón Castillo, William Eduardo (2014-07-03). Diseño e implementación de un sistema genérico de monitoreo usando redes de sensores inalámbricos con el protocolo 6LoWPAN. www.bdigital.unal.edu.co (masters) (in European Spanish). Universidad Nacional de Colombia. Archived from the original on 2018-10-14. Retrieved 2018-10-13.
[edit]